MS Polymer adhesives for solid wood & parquet floors

MS Polymer adhesives are safe, clean and user friendly. That means that there are no known allergic reactions and that the adhesive can easily be removed from hands as well as finished floors. This type of parquet adhesive is water-and solvent-free and meets most international standards.

  • Wakol MS 230 Parquet Adhesive: specifically for engineered parquet

    Wakol MS 230 Parquet Adhesive

    Wakol MS 230 Parquet Adhesive is designed for bonding multilayer (engineered) wood and parquet floors to absorbent substrates. As the market for engineered t+g has grown hugely over the past few years, we have manufactured an adhesive specifically for this purpose. It can also be used for the adhesion of small solid oak parquet and would advise flooring professionals to contact Lecol for additional information. 

    • Consumption per m²: 800-1400 gr
    • Packaging (article nr.): 18 KG (130760)
  • Wakol MS 260 Parquet Adhesive: high tensile strength

    Wakol MS 260 Parquet Adhesive

    MS adhesive has one major difference to traditional fixed adhesives, which is: the product is flexible. Floors installed using this type of adhesive are always allowed to move more than a floor fixed with a traditional solid curing adhesive. With Wakol MS 260 we have significantly reduced the flexibility! Wakol MS 260 is a high tensile strength formula that reduces the risk of excessive movement.

    As a consequence, the advantage is that Wakol MS 260 can be used for a much wider range of applications than its competition. For example: it is possible to install distressed floors without the risk of the adhesive staining the floor. The high initial grab of Wakol MS 260 makes it ideal to install all engineered wood floors directly to the sub floor, additionally Wakol MS 260 is suitable for the installation of wide solid boards up to180 mm, end-grain parquet and 14mm solid wood direct to the sub floor. Floors that have been installed with Wakol MS 260 can also be finished with water based lacquers without the usual issues.

    • Single component adhesive
    • Solvent and water free
    • No known allergic reactions
    • Easy to remove from pre-finished floors
    • No dirty hands
    • Suitable for under-floor heating systems
    • Very good filling properties
    • Flexible / High tensile strength
    • High initial grab
    • 100% solid content
    • Consumption per m²: 800-1400 gr
    • Packaging (article nr.): 18 KG (130757)
  • Wakol MS 265 Parquet Adhesive: sausage adhesive for bulk gun

    Wakol MS 265 Parquet Adhesive

    Wakol MS 265 is available in a 600cc foil sausage and should be applied using a specific Bulk Gun with a correctly cut nozzle. Using this method, a thick bead of adhesive is applied directly to the subfloor giving a very high initial grab, perfect for use on uneven subfloors. The installation can be carried out in conjunction with our slatted underlay and makes the process simple.

    The main properties are:

    • Solvent and Water free
    • No known allergic reactions
    • Easy to remove from pre-finished floors
    • No Dirty Hands
    • Suitable for under-floor heating systems
    • Very good filling properties
    • Flexible / Elastic
    • Consumption per m²: ???
    • Packaging (article nr.): 600cc sausage (121524)